To avoid material aging, it must be properly stored. Rotary shaft seals should be stored in a dry, clean, dust-free place and in their original wrapping, which should only be opened just before installation. The obtained samples must be repacked after inspection. Excessive humidity will wear out the elastomers as well as cause corrosive damage to the metal casing and springs. Do not put rotary shaft seals on shelves or boxes, nor hang seals on hooks, wires or nails, as damage to the sealing lip may occur. Seals should be stored horizontally. Seals should be used in a first-in first-out basis to avoid aging on shelves. Avoid storage near sources of heat or near electrical equipment that may generate ozone. Also keep away from direct sunlight.
Shaft seals interchange table
Manufacturers |
GUMAPLAST-VP type |
||||||||
---|---|---|---|---|---|---|---|---|---|
A |
AUP |
AS-P |
A-O |
A-DUO |
B |
BUP |
C |
CUP |
|
Simirit-Freundenberg |
BA |
BASL |
BABSL |
BAOF |
BADUO |
B1 |
B1SL |
B2SL |
|
Goetze |
827N |
827S |
827SK |
827NO |
827D |
822N |
822S |
824N |
824S |
Kako |
DG |
DGS |
DGSP |
DE |
DGD |
DF |
DFS |
DFK |
DFSK |
Simmerwerke |
A |
ASL |
AOF |
ADUO |
B |
BSL |
C |
CSL |
|
Stefa |
CB |
CC |
CF |
CD |
CK |
BB |
BC |
DB |
DC |
Gaco |
A |
FA |
SA |
DUPLEX |
AB |
||||
NOK |
SC |
TC |
TCN |
VC |
DC |
SB |
TB |
SA |
TA |