Our rotary shaft seals are manufactured according to DIN 3760 and Quality Assurance Standards ISO 9001: 2001, ISO SRPS 9001: 2008 and ISO SRPS 9001: 2015.
All production phases are checked and all measurements are recorded and stored for eventual data verification. Interference allowance and permissible eccentricity
In accordance with DIN 3760.
Type
A
Type
AUP
Type
B
Type
BUP
Type
C
Type
CUP
Seal outer diameter d2 |
Interference allowance(1) |
Tolerance on |
||
---|---|---|---|---|
preko |
do 80 |
Type |
Type |
Type |
over 50 |
to 80 |
+0,30 |
+0,23 |
0,25 |
over 50 |
to 80 |
+0,35 |
+0,25 |
0,35 |
over 80 |
to 120 |
+0,35 |
+0,28 |
0,35 |
over 120 |
to 180 |
+0,45 |
+0,28 |
0,35 |
over 180 |
to 300 |
+0,45 |
+0,30 |
0,80 |
over 300 |
to 500 |
+0,55 |
+0,35 |
1,80 |
(1) The average value for d2 taken from a given number of measurements shall not exceed the indicated value of d2 with the interference allowance.
(2) The tolerance to d2 (e.g. d2 max - d2 min) is to be determined by taking three or more measurements equally spaced around the circumference.